|
- magnetic flow meter
- woltmann water meter
- single jet cold water meter
- alfa-sj-sdc/l water meter
- multi-jet type water meter
- beta- mj-sdc water meter
|
|
DN: 40…..1000 mm
Flanged connections: UNI 2278 PN16 flanges (others available on
request).
Electrodes: in AISI 316(others available on request).
Internal coating: ebonite (others available on request).
Maximum fluid temperature: 100úc "(for higher temperatures,
please require PTFE coating).
Mountings: - compact, with the converter mounted on the meter.
Indicators readable from above are available for models where
the flow is running from left to right.
- With separate converter. In this case it is equipped with a
connector block for connection to the converter through a CO 11
cable.
- Protection rating: IP 68. The meter is delivered with the
cable converter connection already hooked up. Desired length
always to be specified in your enquiries
|
|
- MUT 6009 is
available with a diameter range from DN 150 to 1000.
- It consists in a passage tube in AISI 316 equipped with a
carbon steel flanged connection and athic coat inside of
insulating material up to the flanges
- The two measurement electrodes are positioned at two
diametrically opposed points of internal surface.
- These are also used to indicate possible tube emptying.
- Also, the outer housing is made of carbon steel which has been
treated with bicomponent epoxy resins.
- On the external surface there is a support, on which either
the converter (compact model) or the connector block, is
mounted, if the converter is installed separately.
-Turbine water meters for measurement of cold and hot water up
to 40úC.
|
